Amatrol’s Portable PLC Troubleshooting Learning System - AB CompactLogix L16 (990-PAB53AF) teaches programmable logic controller (PLC) programming, operation, and applications used throughout industry.
Offering a variety of production-grade thermoplastics, FDM® technology creates parts that are highly accurate, tough, and suitable for both functional prototyping and end-use parts. ABS is the most common material used as it boasts good mechanical properties and high name recognition. Compared with ASA, ABS may be more familiar because of its popularity in mass production.
ASA is another popular all-purpose material for jigs and fixtures, manufacturing aids, prototyping and limited-run end-use parts. ASA matches or exceeds the mechanical properties of standard ABS and has greater heat resistance. Moreover, ASA demonstrates exceptional UV stability and, with its matte finish, offers the best aesthetics of any FDM thermoplastic. It’s especially suited for end-use parts in outdoor commercial and infrastructure applications, and its wide array of color options surpasses that of ABS.
FDM® TPU 92A is a thermoplastic polyurethane with a Shore A value of 92. The material exhibits high elongation, superior toughness, durability, and abrasion resistance.
FDM TPU 92A brings the benefits of elastomers to FDM 3D printing and can quickly produce large and complex elastomer parts. Typical applications include flexible hoses, tubes, air ducts, seals, protective covers, and vibration dampeners.
FDM TPU 92A is available on the F123™ Series 3D Printers and is compatible with QSR™ soluble support material.
Produce Large and Complex Elastomer Parts
Create accurate elastomer parts quickly and efficiently with the ease and reliability of professional FDM 3D printing. The durable elasticity of FDM TPU 92A material makes it a good choice for a variety of applications, including flexible hoses, tubes, air ducts and vibration dampeners.
FDM® HIPS (high-impact polystyrene) is a low-cost, general-use 3D printing thermoplastic. It offers similarities to ABS but has high impact resistance making it suitable for printing lower-requirement jigs, fixtures, and prototypes at a reduced cost.
Kimya PC-FR is a polycarbonate FDM® 3D printing filament with flame-retardant properties developed specifically for additive manufacturing. It retains the beneficial characteristics of standard polycarbonate, such as dimensional stability, high glass transition temperature, and high impact resistance.
Kimya PC-FR is a polycarbonate (PC) based material with flame-retardant properties developed specifically for additive manufacturing. It retains the beneficial characteristics of standard polycarbonate such as dimensional stability, high glass transition temperature, and high impact resistance.
Key Attributes
- Flame-resistant material
- Electrical insulator
- Good dimensional stability
- Meets or exceeds the mechanical performance of Stratasys PC material
- Compatible with soluble support
- Meets EN 45545-2 and NFPA 130 standards
- Slice heights: 10
Nylon 12 is a semi-crystalline, FDM® thermoplastic. As with other semi-crystalline materials used in traditional manufacturing processes, special considerations should be implemented to ensure an optimal part is obtained. The information in this document illustrates the following considerations:
- Tip Selection
- Build Modes
- Porosity
- Sacrificial Tower Features
- Build Sheets
- Support Removal
- Annealing
FDM® Nylon 12 filament is the 3D printing equivalent of standard industrial PA12 (polyamide 12) material. A strong engineering thermoplastic that exhibits toughness and high impact strength without being brittle. Its excellent fatigue properties make it a good option for repetitive-flex applications such as snap-fit clips, closures, and press-fit inserts.
Other applications include jigs, fixtures, low-volume production parts, and accurate prototyping of nylon 12 high-volume injection molded parts. FDM Nylon 12 is available in black.
FDM® Nylon-CF10 is a composite material combining a blended nylon polymer with 10% chopped carbon fiber (by weight), enhancing the material’s strength and rigidity. The nylon base polymer also gives FDM Nylon-CF10 good chemical resistance.
FDM® Nylon 12CF™ is a PA12 (polyamide 12) thermoplastic filament reinforced with chopped carbon fiber, 35% by weight. It has the highest flexural strength of any FDM thermoplastic, resulting in the highest stiffness-to-weight ratio. The combination of high strength, stiffness, and light weight makes it an optimal replacement for heavier metal components in appropriate use cases.
Typical applications include strong, lightweight tooling, functional prototyping and select end-use parts.
Pages
-
Item Number:990-PAB53AF -
Item Number:990-PABCL1FAmatrol’s PLC Troubleshooting Learning System for the AB CompactLogix provides comprehensive PLC operation and troubleshooting knowledge in a portable format for when training space is constrained, but skill-building cannot be sacrificed! Learners will study topics like Programmable Controller Operation, PLC Ethernet Communication, Basic PLC Project Elements, PLC Motor Control, Event Sequencing, and more! -
Item Number:990-PAB53AFAmatrol's 990-PAB53AF Portable PLC Troubleshooting Learning System provides a comprehensive curriculum and a cutting-edge workstation to teach PLC (Programmable Logic Controller) programming, operation, and applications used in industry. The 990-PAB53AF uses FaultPro, Amatrol’s unique electronic fault insertion, to teach PLC troubleshooting skills, such as PLC input and output testing, software testing, and application troubleshooting. -
Item Number:990-PN1Amatrol's Portable Pneumatics Learning System (990-PN1) offers hands-on training in basic and intermediate pneumatic concepts. Featuring real-world components in a portable case, this system enables learners to practice cylinder operation, flow controls, valves, air motors, and gauges, fostering skill development and workforce readiness. -
Item Number:990-ELE1Amatrol's 990-ELE1 features a various electrical components and circuits, including: AC and DC power supplies, ΔV potentiometer, thermocouples, resistive temperature detectors, thermistors, electronic sensors, solid state relays, transistor and operational amplifiers, field effect transistors, silicon-controlled rectifiers, triacs, and phase control circuits. -
Item Number:990-PG1Amatrol’s Portable Precision Gauging Learning System (990-PG1) covers the fundamentals of basic measurement, precision measurement, direct gauging, indirect gauging, and dimensional measurements using both the U.S. customary system and the SI metric system all within a mobile, highly durable product. Measurement is a cornerstone of all technical career paths and a major part of quality assurance, which helps to keep product quality high and costs low. -
Item Number:990-SM10Amatrol's newest advanced manufacturing trainer is the Portable Smart Manufacturing Learning System (990-SM10). Developed in partnership with CESMII, this system is designed to provide hands-on learning in Smart Manufacturing and Industry 4.0 technologies. -
Item Number:211-140DAC Worldwide’s Positive Displacement Blower Cutaway, Rotary Lobe-Type (211-140) is a full-size, fully-detailed sectioned rotary lobe-type positive displacement compressor that provides learners a first-hand view into a component that is found in various applications worldwide. -
Item Number:211-110DAC Worldwide’s Positive Displacement Compressor Cutaway, Piston-Type (211-110) is a realistic, sectioned, piston-type positive displacement compressor. Rather than a scale model, the cutaway is a piece of actual industrial hardware sourced from popular industrial makes and models. T -
Item Number:272-980DAC Worldwide's Pressure Control Switch Sample Dissectible (272-980) is a realistic dissectible sample of a common industrial control-type pressure switch as used in automation and process systems.
