FANUC’s new SCARA robots are ideal for high-speed, precision applications such as assembly, pick and place, testing/inspection and packaging processes.
Intro to Civil Engineering
Amatrol’s Structural Engineering 1 Learning System (96-SE1) introduces high school students to the field of civil engineering. Civil engineers are responsible for creating structures such as skyscrapers, bridges, tunnels, dams, mass transit systems, water treatment facilities, and many more structures that we use every day for living, transportation, and industry. Learners will learn the fundamentals of structural analysis as well as bridge design and construction.
The structural engineering training system includes the T9004 Structural Testing Systems consisting of a workstation, bridge component sets, a test fixture set, indicator package, bridge designer software, supplemental CD, and interactive multimedia student curriculum. These components are used to teach topics such as civil engineering careers, structural stability, force vectors, and bridge design.
Intermediate Structural Engineering Training System for High School
Amatrol’s Structural Engineering 2 Learning System (96-SE2) adds to the Structural Engineering 1 Learning System (96-SE1) to teach statics, data acquisition, and bridge design analysis. The data acquisition system uses structural members equipped with stain gauges to measure the forces acting on a structure, constructed by the learners, and the system records these values to provide a clear picture of how the structure is reacting to the applied force. Through calculations and data acquisition analysis, intermediate structural engineering learners will analyze the forces in truss bridge designs.
The intermediate structural engineering training system includes a data acquisition system, bridge components fitted with strain gauges, a test fixture hardware package, and interactive multimedia student curriculum. The learning content covers topics such as bending stress and the moment of inertia, data acquisition, and truss bridge analysis.
Advanced Structural Engineering Training System for High School
Amatrol’s Structural Engineering 3 Learning System (96-SE3) covers a variety of foundational industrial topics including: concrete mixing, placement, and testing; how to control column and beam deflection; preventing columns from buckling; and designing buildings to both support normal loads and to stand up to environmental elements. These skills can be used to move into fields like construction, engineering, and architecture. The 96-SE3 utilizes components from the Structural Engineering 1 Learning System (96-SE1) and builds on knowledge introduced in that system.
The Advanced Structural Engineering training system includes concrete and metal beam component sets and a building component set that allow learners to practice real-world skills while they study the safety steps, advantages of certain materials, and overall theoretical knowledge behind these foundational engineering concepts. Some of the major topic areas covered by the 96-SE3’s curriculum include beam and column design, the fundamentals of concrete, building design, and building construction. This interlacing of theoretical knowledge and hands-on skills builds learner competencies and gives them the knowledge to move on to more advanced structural engineering topics.
Because surveying is utilized in so many aspects of industry, the skills taught by the Surveying 1 Learning System (96-SV1) opens the doors to careers in various fields, such as manufacturing, transportation, and construction. Amatrol’s Surveying training system introduces the fundamentals of surveying, which includes focusing on determining the terrestrial or three-dimensional position of points and the distances and angles between them; this signature Amatrol approach to curriculum reinforces both theory and practice, which produces a well-rounded understanding of the topic.
After completing this training system, learners will be able to operate surveying and mapping tools, including global positioning systems (GPS) associated with surveying, but will also understand the relevant key concepts.
Amatrol’s Thermal Technology 1 Learning System provides learners with the knowledge and equipment needed to comprehend the principles of modern thermal systems, such as HVAC, geothermal, refrigeration, and steam systems.
AC, Refrigeration & Heat Pumps
Amatrol's Thermal Technology 2 Learning System (96-TT2) teaches three types of thermal systems: air conditioning, refrigeration, and heat pumps. Students will learn industry-relevant skills including how to operate, install, analyze, and adjust these systems.
The Advanced Thermal Technology training is a working system with industrial components that can perform heat pump, air conditioning, and refrigeration systems operation. These components are mounted on a mobile workstation and supported by instrumentation, microprocessor control, student learning materials for both theory and lab, and teacher’s guide.
Belt & Chain Drive Training System
Amatrol’s Mechanical Drives 2 Learning System (97-ME2) covers the construction, operation, installation, and alignment of heavy-duty V-belt drives, synchronous belt drives, and heavy-duty chain drives. This system also delves into topics associated with the maintenance and proper operation of these drives, such as belt and chain selection, lubrication, couplings, and drive troubleshooting. The drive systems featured in this mechanical drives training system are utilized in countless automotive, agricultural, industrial, and commercial applications, so the advanced manufacturing career fields for learners using these skills are vast. This mechanical drives training expansion system requires the Mechanical Drives 1 Learning System (970-ME1), viscosimeter, and a computer.
The 97-ME2 consists of a coupling/sprocket package, belt drive components package, power transmission belt and chain package, a grease gun, various indicators, and a fastener kit. Learners will use these real-world components to practice hands-on skills, such as installing and aligning a backside V-belt idler, troubleshooting a V-belt drive system, using a grease gun to lubricate a pillow block bearing, and installing and aligning a silent chain drive system. Amatrol uses heavy-duty components that stand up to frequent training use and build the skills and competencies learners need to succeed in the workplace.
Amatrol's Laser Shaft Alignment Learning System (97-ME2A) covers the installation, operation, and applications of laser alignment in a variety of industrial scenarios. Laser shaft alignment is the preferred method of shaft alignment among maintenance and plant engineering personnel due to its superior efficiency and accuracy over older methods like the dial indicator method or the straight edge and feeler gauge method. Laser alignment systems also avoid problems such as sagging indicators, reading resolution error, and reading parallax error. These components add to the Mechanical Drives 2 Learning System (97-ME2) and the Mechanical Drives 1 Learning System (970-ME1).
Amatrol’s 97-ME2A includes a laser alignment system, two measuring units, two shaft v-brackets, two locking chains, and a motor mount horizontal adjustment assembly. Amatrol learning systems are composed of heavy-duty components that provide learners with real-world equipment they’ll recognize on the job and already understand how to use. These components will be used to study topics like rough alignment, laser shaft alignment installation, soft foot correction, and laser shaft alignment operation and analysis.
Bearings, Gaskets, & Seals Training
Amatrol’s Mechanical Drives 3 Learning System (97-ME3) covers plain bearings, ball bearings, roller bearings, anti-friction bearing selection and maintenance, gaskets, seals, advanced gear drives, and gear drive selection and maintenance. The drive systems featured in this mechanical drives training system are utilized in countless automotive, agricultural, industrial, and commercial applications, so the advanced manufacturing career fields for learners using these skills are vast. This mechanical drives training expansion system requires the Mechanical Drives 1 Learning System (970-ME1), viscometer, and a computer.
This mechanical drives training system consists of a fastener kit, worm gear speed reducer, ball bearings package, roller bearings package, plain bearings package, angular contact bearings, bearing press, seals package, and helical gear set. Learners will use these real-world components, like bearings and gaskets, to practice hands-on skills, such as troubleshooting a plain bearing installation, selecting a lubricant for an anti-friction bearing, and calculating a diametral path. Amatrol uses components that learners work with in real-world environments in order to facilitate the strongest competency skill building and to supply heavy-duty components that stand up to frequent training use.
Amatrol’s Predictive Maintenance Vibration Analysis Learning System (97-ME5A) adds to the Mechanical Drives 1 training system (970-ME1) to teach how to use vibration analysis to determine when to perform power transmission component maintenance. Vibration analysis is one of the key techniques used in the field of predictive maintenance to determine when to service one or more of a machine’s components, either making a replacement or adjustment, before a failure actually occurs. Learners will practice industry-relevant skills including how to use a vibration meter to take a vibration measurement, how and where to take various power transmission system measurements, how to read power transmission vibration analysis, and how to minimize vibration.
Pages
-
-
In the rare event that a burning ember or spark is drawn into the fume extraction unit, there is the possibility that debris in the filters could ignite. Although any resultant fire would typically be retained within the fume extraction unit, this would cause significant damage and in extreme circumstances, the risk may extend beyond the extraction unit. For processes where such risks have been identified, additional protection in the form of an in-line firebox is an additional precaution.
-
The BOFA inline pre-filter 1000 has been designed specifically for applications that generate high amounts of dust or particulate.
This inline filter unit is positioned alongside the main BOFA fume filtration system to increase the overall filter capacity and extend the life of the main filters. The DeepPleat DUO pre-filter incorporates a massive drop-out chamber within the filter, having a volume area of 15ltrs. Above the drop-out chamber but still within the housing there is a sealed 200mm deep pleat layer of F8 media giving a surface area in excess of 30 sq meters.
-
The BOFA inline prefilters have been designed specifically for applications that generate high amounts of dust or particulate. -
Autolab has been specifically designed to allow you to build a NATEF Certified auto program that will enable your students to become new hi-tech auto technicians. The Autolab learning platform provides a series of cloud-based resources that can be used to create an auto teaching facility that will deliver the knowledge and practical skills students need to achieve success. -
Item Number:LMV-300 CNCThe LMV-300 CNC machine dubbed “Quicksilver” delivers high rigidity, high accuracy and high-speed machining for all your cutting needs. The entire machine’s construction stably attaches to a granite bed thus dampening vibrations and making the machine a robust system. The cornerstone of the machine is that it is literally made from stone.
-
Item Number:96-PLS1TThe injection molding trainer includes a temperature control system, 4 oz. shot material feed system with electro-pneumatic control, dual heater system, barrel and nozzle, safety enclosure, heavy-duty workstation, 8-ton clamping system, mold offset plates, set of injection starter molds, interactive curriculum for both theory and lab, and a teacher’s assessment guide. -
Item Number:96-PLS2The 96-PLS2 includes a clamping system, extrusion die for use with blow molding, pneumatic blow system, starter mold for blow molding, extrusion die, interactive curriculum for both theory and lab, and a teacher’s assessment guide. Students will learn skills such as creating a plastics part using a blow molding operation, troubleshooting blow molds, designing a blow mold using CAD/CAM, creating a blow mold using a CNC machine, creating a plastics part using an extrusion operation, and testing an extrusion for uniform diameter. -
Item Number:990-PS712Inside this attractive, durable carrying case, learners will find a world-class learning system with components like the KTP 600 Human Machine Interface (HMI) panel, which allows user input and displays output data. Combined with Amatrol’s thorough curriculum, learners will gain both theoretical and hands-on knowledge that can start them on a path towards a rewarding career. -
Item Number:LMV-F400 RLAn excellent teaching machine with an all in one production center. This top of the line Milling Machine includes an attached FANUC LR Mate 200iD Robot arm. With this machine, educators have everything they will need to teach students both Robot programming and CNC machining.
