DAC Worldwide’s Centrifugal Clutch Cutaway (200-2204) depicts a modified industrial centrifugal clutch for mechanical drive training in a classroom or laboratory. This sectioned mechanical power transmission component uses centrifugal force to connect two concentric shafts by throwing a centrifugal shoe outwards at a right angle to the primary shaft axis, which allows for shift during start-up.
Module 15: Cantilever Racks and Flatbed Truck has trainees working with cantilever racks and a flatbed truck, picking up each marked load and placing it at its target position defined by an outline of the same color as the load, using the overhead map for guidance.
Simlog's Reach Lift Truck Personal Simulator puts you at the controls of a typical stand-up narrow aisle lift truck with a scissors-like pantograph to extend and retract the forks. Training scenarios are typical of warehouses and distribution centers where racking systems are tall and closely spaced to increase storage density.
Industrial Controls:
A superior simulation experience with OEM elements
Key Benefits:
- OEM Multi-Task Handle (two options)
- Steering Tiller
- Foot Brake Pedal Unit
- Two pushbuttons for alternative viewpoints
- Mini-joystick to pan/tilt current viewpoint
- Emergency power disconnect pushbutton
- Front panel key lock
Simlog's Reach Lift Truck Personal Simulator puts you at the controls of a typical stand-up “narrow aisle” lift truck with a scissors-like pantograph to extend and retract the forks. Training scenarios are typical of warehouses and distribution centers where racking systems are tall and closely spaced to increase storage density.
The immersive all-in-one operator training simulator
The Vortex Advantage is an immersive, motion-enabled training simulator that develops transferable operator skills. It’s designed for extended training, including mastering advanced skills. With professional-grade hot-swappable controls sets and pedals, the Vortex Advantage delivers high-quality training and flexibility, powered by the industry’s leading simulation software.
Benefits
- Safe, effective training, 24-7
- All-in-one training platform
- Built to last
Monitor, assess, and engage construction equipment operator trainees from a single workstation
CM Labs’ Instructor Operating Station (IOS) gives instructors complete control of operator training sessions. You can initiate exercise sessions, monitor operations from your seat, and challenge trainees by exposing them to various tasks and job site conditions. It is the only solution on the market that provides instructors with a real-time 3D view of learning progress from any vantage point on the virtual work site.
Benefits
- Challenge trainees for maximum learning effectiveness
- Benchmark trainees easily with smart assessment tools
- Enable full team-based training in a single classroom
Operator training and assessment, whenever and wherever needed.
CM Labs’ Mobile Training Center allows organizations to offer training and assessment where needed most. Whether on the road or at remote locations, the Mobile Training Center was designed for all-season versatility and use.
Benefits
- Multiply your training capabilities
- Bring training to the job site
- Memorable branding
Train to worksite standards in the classroom
With CM Labs Simulations’ Signalperson Training Station, trainees learn critical worksite skills, such as communication and teamwork, in a safe environment. While one trainee operates a crane on a Vortex simulator, another works cooperatively within the virtual job site, providing signals and guiding the operation through to successful completion via a webcam and picture-in-picture display.
Trainees can move around the worksite to inspect the lifting area, recognize potential hazards, gain a clear view of all site activities, and provide hand signals to the crane operator.
Together, they either fail as a team — or succeed as a team. The result: new operators that are better prepared for any job site.
Simulator Adoption Made Easy with CM Labs’ SimGuide Service
CM Labs’ SimGuide Service is designed to simplify the integration of your new simulator. We’ll guide you throughout the process of setting up and implementing your simulator, no matter what your objective.
With the SimGuide Service, you get a complete road map detailing how and when to use your simulator to meet your targets.
The SimGuide Service is for organizations at any stage of simulator adoption, whether developing a simulation-based training program for the first time, or extending the use of existing their CM Labs simulators.
CM Labs’ Excavator Simulator Training Pack: Operator readiness for today’s job sites.
CM Labs’ Excavator Simulator Training Pack is an all-in-one solution for learning critical operator skills, including basic operations, advanced skills, worksite collaboration, and the latest operator assistance technology.
There’s no simpler or safer way to prepare operators for the tools that are part of today’s highly technical job sites.
Vortex simulators: best-in-class training
CM Labs equipment training simulators provide operators with the skills to operate equipment safely and efficiently. Trainees can practice challenging real-world operations in complete safety while key operating performance metrics are objectively logged and recorded throughout training.
Operators can prepare for the routine and the unexpected. This makes our simulators invaluable for teaching safe, productive, economic machine use. With swappable controls and configurations ranging from the desktop to an immersive five-display simulator, Vortex simulators are built to run a wide range of training packs. Each Simulator Training Pack features self-guiding, progressive learning programs, and best-in-class simulation.
- Crane and Lifting Equipment
- Earthmoving Equipment
Pages
-
Item Number:200-2204 -
Item Number:211CThe design of the Centrifugal Compressor Model is based upon common industrial centrifugal compressors. -
Item Number:950-PM1The model 950-PM1 Pumps Learning System teaches skills related to centrifugal pumps, which are used in almost every industry to transfer non-hydraulic fluids of various types from one place to another. Students learn a comprehensive set of industry-relevant skills including how to operate, install, maintain, troubleshoot, analyze performance, and select centrifugal pumps as well as system design. -
The CFT program was created in partnership with the Material Handling Equipment Distributors Association (MHEDA) to provide skills to entry-level forklift technicians, enhancing their performance in the world of material handling. The CFT prepares individuals to repair and maintain technical systems utilizing key engineering principles that underpin most forklift vehicles. -
Item Number:C-101 / C-102 / C-103 / C-104SACA’s Associate certifications are introductory Industry 4.0 certifications appropriate for operators and other individuals seeking to become familiar with Industry 4.0 factory floor automation equipment and processes. -
SACA’s Certified Industry 4.0 Professional certification is an engineering certification that focuses on the analysis, design, and optimization of Industry 4.0 systems. It prepares engineers to succeed in positions in modern production environments that use Industry 4.0 technologies. -
SACA’s Specialist certifications certify Industry 4.0 technical skills in operations, troubleshooting, programming, maintenance, and systems integration. Each certification is keyed to a skilled occupation. -
The purpose of the Certified Logistics Technician (CLT) program is to recognize through certification individuals who demonstrate mastery of the core competencies of material handling at the front-line (entry-level through front-line supervisor) through successful completion of the certification assessments. -
Item Number:CPT / CPT+ / CPT 4.0The purpose of the Certified Production Technician (CPT) ® 4.0 certification program is to recognize through certification, individuals who demonstrate mastery of the foundational, core competencies of advanced manufacturing production at the entry-level to front-line supervisor through successful completion of the certification assessments. -
Item Number:CT-SCAMSSC’s Certified Technician in Supply Chain Automation (CT-SCA) logistics certification enables both students and incumbent workers to gain the skills needed to meet the definition of a supply chain automation technician established by the National Science Foundation-funded National Center for Supply Chain Automation: a technician who installs, operates, supports, upgrades or maintains the automated material handling equipment and systems which support the supply chain.
