The In-Line Helical Gear Reducer Dissectible is a sturdy unit mounted on a 7-gauge, formed-steel baseplate with provision for bench-top, workstation, or storage rack mounting.
Simlog Off-Highway Truck Personal Simulator's Complete Haul Cycle 2 Module has trainees drive the truck from the dumping zone to the wheel loader. After the truck is fully loaded by the loader, return the dumping zone, dump the load and drive away.
Simlog's Reach Lift Truck Personal Simulator: Slalom 1 Forward Driving - pick up the load, drive forward through the slalom course, and place the load on the floor at the target position defined by a red outline.
Simlog's Reach Lift Truck Personal Simulator: Slalom 2 - Pick up the load, drive in reverse through the slalom course, and place the load on the floor at the target position defined by a red outline.
Simlog's Reach Lift Truck Personal Simulator: Selective Pallet Racks 2, Standard Aisles - Working with selective pallet racks, pick up each marked load and place it at its target position, using the overhead map for guidance. The loads and their target positions are mixed among the various heights of rack shelves.
Simlog's Reach Lift Truck Personal Simulator: Selective Pallet Racks, Narrow Aisles - working with selective pallet racks, pick up each marked load and place it at its target position, using the overhead map for guidance. The loads and their target positions are mixed among the various heights of rack shelves.
Simlog Mining Truck Personal Simulator - Corridor Driving Module: Trainees drive the truck through the corridor to the target. The trial ends when the truck is over the target and parked (gear in Park or Neutral with parking brake engaged).
Simlog Mining Truck Personal Simulator - Complete Haul Cycle 1 Module: Trainees drive the truck from the dumping zone to the rope shovel and position the truck under the dipper (the shovel's horn will sound when the truck is appropriately positioned).
After the truck has been fully loaded (the shovel's horn will sound when the loading is complete), return to the dumping zone, dump the load and drive away.
Simlog Electric Rope Shovel - Following Grade Module: make the rightmost dipper tooth follow the line (the cursor changes color as the tooth moves away from the line). The trial ends when the tooth reaches the end of the line, and the operator activates the horn.
Simlog Electric Rope Shovel - Single-Pass Digging Module: Fill the dipper by digging at the rock face. The trial ends when there is material in the dipper, the dipper is no longer in contact with the rock face, and the operator activates the horn.
Simlog’s Bulldozer Personal Simulator puts students behind the controls of a medium-sized Bulldozer as they experience the reality of a typical construction site. The virtual work site features dynamic terrain with life-like dirt pushing and spreading.
Training efficiency is delivered through a modular Instructional Design that teaches real skills for productive and safe equipment operations in the field.
Pages
-
Item Number:205-130 -
Item Number:205-255In-line helical gear reducers have a unique set of benefits. They’re useful in higher horsepower applications where long-term efficiency is more important than initial costs, which can be higher for this type of gear reducer (although in-line reducers are less expensive than parallel shaft reducers). In addition to being highly efficient, in-line helical gear reducers are capable of handling higher overhung loads. -
Item Number:205-285DAC Worldwide's In-Line Planetary Gear Reducer Cutaway (205-285) is a sectioned industrial gear reducer for use in classroom and laboratory training relating to mechanical drives. -
Item Number:298DAC Worldwide’s Induced Draft Cooling Tower Model (298) is a highly-detailed scale model of a common open circuit, induced draft, cooling tower, supporting training in the operation and maintenance of cooling towers, as found in utility systems within both industrial facilities and commercial installations. -
Item Number:273-905DAC Worldwide’s 2-Pole Circuit Breaker Cutaway (273-905) is a double pole, DIN rail-mounted, single-phase industrial breaker that has been carefully sectioned so that learners can see the internal configuration of the breaker. -
Item Number:T7500Amatrol's T7500 Refrigeration Learning System: Comprehensive training in VFD control, data acquisition, troubleshooting, and more, with a curriculum covering electrical components, system operation, controller programming, and airflow measurements. -
LJ Create's Industry 4.0 program is designed to give students a foundation in how Industry 4.0 and STEM concepts are applied in career pathways and then develop their knowledge and skills in specific industry sectors. -
With the Instructor Operating Station (IOS), you can initiate exercise sessions, monitor operations from your seat, and challenge trainees by exposing them to various tasks and job site conditions. -
Item Number:120-BPT | 120-CFCD | 120-CPT | 120-IPTInstrumentation and Process Control Training aids include a Basic Process Trainer, Flow and Level Control Trainer, and an Instrumentation Process Trainer. -
The Stratasys J35™ Pro is an affordable, versatile PolyJet 3D printer suitable for shared spaces offering multi-material capabilities.
