The MINDS-i Drone Gimbal Rig gives you the ability to pilot the MINDS-i UAV in a safe and controlled environment. The preassembled rig allows you to introduce flight controls and best practices to anyone, regardless of skill level or age. With the Gimbal Rig’s 3-Axis system, you have the full-motion capabilities of the UAV at your fingertips. The MINDS-i Gimbal Rig is an excellent fit in a classroom, trade show, or convention.
Amatrol’s Alternator/Synchronous Motor Learning System (85-MT2C) adds to the Basic Electrical Machines Learning System (85-MT2) to teach skills related to alternators and synchronous motors commonly found in industrial applications. Alternators provide a mobile source of AC electrical power while synchronous motors reduce power costs by correcting the overall power factor in a plant. Learners will study industry-relevant skills in industrial motor training, including how to operate, install, and analyze the performance of alternators and synchronous motors.
The alternator and synchronous motor training system includes capacitive load, combination synchronous motor/alternator, and synchronizing lights/switch units. The capacitive load unit combines with the 85-MT2 to provide operation under various types of loads. In addition to industrial components, this training system includes in-depth curriculum, an instructor’s guide, and a student reference guide. The highly-interactive, multimedia curriculum covers major topical areas such as alternator output voltage and frequency, three dark synchronization method, and reversing a synchronous motor.
Amatrol’s Wound Rotor Motor Learning System (85-MT2D) covers the function, operation, and performance characteristics of wound rotor motors. While variable frequency drives (VFDs) and standard induction motors have replaced wound rotor motors in many applications, these motors are still used for heavy-duty, high torque applications such as industrial cranes and hoists. Amatrol’s wound rotor motor training system requires the Basic Electrical Machines Learning System (85-MT2) for use.
Wound rotor motor training includes a wound rotor speed controller, a wound rotor motor, banana leads, in-depth multimedia curriculum, an installation guide, and a student reference guide. These components will be used to study topics such as wound rotor speed control, performance characteristics, and motor reversing. Amatrol systems feature real-world, industrial-grade components for both durability and to facilitate learners in gaining hands-on practice with actual equipment that they’ll find in the field.
Amatrol’s Electric Motor Troubleshooting Learning System (85-MT2E), used in conjunction with the required Basic Electrical Machines Learning System (85-MT2), covers AC and DC motors troubleshooting and testing using a multimeter and a megger meter. The skills and knowledge covered by this system will prove invaluable for industrial maintenance technicians or anyone working in a field that uses AC and/or DC motors. This system covers major topics like AC and DC motor failures, common methods of diagnosing these failures by using a multimeter and megger meter, and troubleshooting these failures.
The 85-MT2E includes a motor connection box to practice hands-on skills, such as troubleshooting faults in a DC motor and AC single-phase and three-phase motors, evaluating DC electric motor commutator and brush health, and using a multimeter to test an AC motor start/run capacitor. Amatrol’s industrial training systems feature real-world, industry-grade components for durability that will stand up to frequent use and to allow learners to gain real-world competencies.
The AC Elector Motor Control Systems Trainer will give your students hands-on learning with motors found in industrial, commercial, and residential applications. It's versatile, comprehensive, and has eLearning built around it. Watch for a quick overview of the system.
Amatrol’s Electric Motor Control Learning System (85-MT5) teaches electric relay control of AC electric motors found in industrial, commercial, and residential applications. Learners study industry-relevant skills including how to operate, install, design, and troubleshoot AC electric motor control circuits for various applications.
The 85-MT5 includes a bench top-mount control workstation, motor workstation, AC induction motor, control component panels, multimeter, lead set, and student curriculum that is unmatched within the industry. This system uses industrial-quality components to train learners to become better prepared for what they will encounter on the job. Some of the major components that learners will work with include a control transformer, reversing contactors, manual motor starter, multi-function timer, and control relays.
The 85-MT5 teaches learners how to troubleshoot motor control circuits under realistic conditions. Circuit faults can be introduced using either the included manual fault insertion system or through the optional Fault Troubleshooting System (890-FTS1), which includes Amatrol’s FaultPro, the industry’s only electronic-fault insertion software.
Amatrol’s Motor Braking Learning System (85-MT5A) adds to the Electric Motor Control Learning System (85-MT5) to expand a learner’s knowledge of the common electric motor braking methods found in industrial, commercial, and residential applications. Braking is essential to motor control when motors must be stopped and restarted multiple times. Common applications include rolling mills, conveyors, and power fans. Learners study industry-relevant skills for three of the most common braking methods: electromagnetic braking, plugging, and DC injection braking. Troubleshooting braking problems under realistic conditions allows learners to experience the challenge and reward that result from applied problem solving.
The motor braking training system includes a DC braking station with power supply, transformer and bridge rectifier mounted to a slide-in panel, inertial load module with flywheel, electromagnetic brake, plugging/anti-plugging switch, student curriculum, and instructor’s guide. This system uses industrial quality components that stand up to frequent use and enable learners to better prepare for what they will encounter on the job.
Amatrol’s Reduced Voltage Starting Learning System (85-MT5B) adds to the Electric Motor Control Learning System (85-MT5) to teach methods of starting electric motors under reduced voltage, 3-phase power distribution using Delta and Wye transformer wiring configurations, and troubleshooting. Reduced voltage starting is ideal for applications where full motor torque could tear or damage a product, such as paper or delicate fabric. Learners will study Wye-Delta power distribution, types of voltage circuits, and the operation of an autotransformer reduced voltage starter.
Reduced voltage starting includes a Dual Transformer Station, featuring two control transformers, and a Power Resistor Station, featuring three 25-ohm, 100-watt resistors. This industrial motor control training system uses industrial-quality components that stand up to frequent use and enables learners to practice with real-world components that they will encounter on the job.
Amatrol’s Variable Frequency AC Drive Learning System, AB PowerFlex (85-MT5C) adds to the Electric Motor Control Learning System (85-MT5) to teach basic and advanced concepts related to variable frequency drives (VFDs), as well as their many industrial applications, including fans, pumps, conveyors, mixers, grinders, and hoists. For example, learners will study the operation, installation, design, performance analysis, and troubleshooting of VFDs.
Learners will also practice hands-on skills like programming and operating a variable frequency AC drive to ramp a motor up to its rated speed and decelerate to a stop. The training system features heavy-duty, real-world components, such as an Allen-Bradley PowerFlex4 VFD, multi-turn potentiometer for speed control, and selector switches for general drive control, basic stop/start, ramping, and dynamic braking. These industry-standard components prepare learners for situations that they will encounter on the job.
Amatrol’s Electronic Sensors Learning System (85-MT5D) adds to the Electric Motor Control Learning System (85-MT5) to teach the function and applications of a variety of electronic sensors in industries like automotive, packaging, and security. This electronic sensor training system is comprised of heavy-duty, real-world industrial components such as capacitive, inductive, and infrared sensors that are built to stand up to heavy use.
Learners can connect and operate these electronic sensors, study their design, and analyze their performance in order to build skills that can be applied to real-world job opportunities. Amatrol reinforces this skill-building practice with strong curriculum that thoroughly explains electronic sensor topics, such as factors that affect a sensor’s performance. This combination of hands-on skills and strong theoretical knowledge gives learners the ability to not only understand where to use a sensor in a circuit, but why it’s there and what its function is.
Amatrol’s Electronic Counter Learning System (85-MT5E) adds to the Electric Motor Control Learning System (85-MT5) to teach electrical event counting in electrical motor control circuits. Electronic counters are used in a wide variety of applications, including production counting, reject counting, sorting, and flow timing. The electronic counter training system features a digital 3-digit electronic counter set within a heavy-duty, 11-gauge steel slide-in panel built to stand up to frequent use.
This industrial training system also features world-class curriculum that covers counter and timer operation, designing circuits, and troubleshooting. Learners can then directly apply this theoretical knowledge to practice hands-on skills, such as designing a timed one-shot motor control circuit, a timed repeat cycle motor control circuit, and a motor control circuit using the counter to tally operations. Learners can also practice troubleshooting a timed one-shot motor control circuit and a timed repeat cycle motor control circuit.
Pages
-
Item Number:MCK-DRGY-001 -
Item Number:ULTRA R5000Tech-Labs technical training solutions. -
Item Number:ULTRA R9000The ULTRA R9000 platform offers laser material processing for a wide range of materials. It is designed and ideally suited for material processing in manufacturing, research and development, academic research, and prototyping environments. With its unique modular architecture, customizable solutions can be easily reconfigured with a wide array of options for enhancing performance, capability, and safety to complete the perfect solution to meet present and future business needs. -
Item Number:ULTRA X6000The ULTRA X6000 platform offers laser material processing for the widest possible range of materials. It is designed and ideally suited for precision material processing in manufacturing, research and development, academic research, and prototyping environments. With its unique modular architecture, customizable solutions can be easily reconfigured with a wide array of options for enhancing performance, capability, and safety. -
Item Number:130-DTU1 | 130-DTU2 | 132-DTT5 | 132-DTT6 | 132-FCCUUnit Operations give operators a peek inside the systems they work with every day. Includes: Distillation Trainers, a Distillation Tray model, and working demonstrators covering Distillation Towers and Fluid Catalytic Cracking. -
With its open multimedia courses, the UniTrain system has pursued this approach for many years, thus enabling it to be deployed in diverse learning scenarios. The multimedia courses are closely aligned with international standards to allow their integration into numerous learning management systems. -
Item Number:200-2083DAC Worldwide’s Urethane Tire Coupling Cutaway (200-2083) highlights a professionally-crafted, sectioned industrial shaft coupling. The full-size, fully-detailed example gives learners a first-hand view into a component that is found in various applications worldwide and supports both instructor-led training and student self-discovery. -
Every individual should be trained with hands-on skills for basic workplace safety. With our Enterprise Safety package, you get seven modules that allow learners to put safety training into practice in a safe, virtual environment. The training modules include Confined Space, LOTO, Fall Protection, AED, CPR, Fire Suppression, and Virus Vision. -
Item Number:250-000DAC Worldwide’s Valve Packing Training System (250-000) is a detailed replica of a six-inch gate valve, equipped with a backseat, which facilitates the proper removal and installation of packing. -
Item Number:250-PACIndustrial maintenance technicians must be familiar with a wide variety of valves used throughout many different types of industries. A common task technicians encounter on the job is replacing valve packing to prevent valves from leaking.
