DAC Worldwide’s Screw Pump Dissectible (Imo) (275-190) is one of a limited group of enhanced dissectible products. This re-manufactured, realistic dissectible industrial pump can be used for training relating to the repair and overhaul of specialized process pumps.
Simlog Off-Highway Truck Personal Simulator's Complete Haul Cycle 2 Module has trainees drive the truck from the dumping zone to the wheel loader. After the truck is fully loaded by the loader, return the dumping zone, dump the load and drive away.
Simlog's Reach Lift Truck Personal Simulator: Slalom 1 Forward Driving - pick up the load, drive forward through the slalom course, and place the load on the floor at the target position defined by a red outline.
Simlog's Reach Lift Truck Personal Simulator: Slalom 2 - Pick up the load, drive in reverse through the slalom course, and place the load on the floor at the target position defined by a red outline.
Simlog's Reach Lift Truck Personal Simulator: Selective Pallet Racks 2, Standard Aisles - Working with selective pallet racks, pick up each marked load and place it at its target position, using the overhead map for guidance. The loads and their target positions are mixed among the various heights of rack shelves.
Simlog's Reach Lift Truck Personal Simulator: Selective Pallet Racks, Narrow Aisles - working with selective pallet racks, pick up each marked load and place it at its target position, using the overhead map for guidance. The loads and their target positions are mixed among the various heights of rack shelves.
Simlog Mining Truck Personal Simulator - Corridor Driving Module: Trainees drive the truck through the corridor to the target. The trial ends when the truck is over the target and parked (gear in Park or Neutral with parking brake engaged).
Simlog Mining Truck Personal Simulator - Complete Haul Cycle 1 Module: Trainees drive the truck from the dumping zone to the rope shovel and position the truck under the dipper (the shovel's horn will sound when the truck is appropriately positioned).
After the truck has been fully loaded (the shovel's horn will sound when the loading is complete), return to the dumping zone, dump the load and drive away.
Simlog Electric Rope Shovel - Following Grade Module: make the rightmost dipper tooth follow the line (the cursor changes color as the tooth moves away from the line). The trial ends when the tooth reaches the end of the line, and the operator activates the horn.
Simlog Electric Rope Shovel - Single-Pass Digging Module: Fill the dipper by digging at the rock face. The trial ends when there is material in the dipper, the dipper is no longer in contact with the rock face, and the operator activates the horn.
Simlog’s Bulldozer Personal Simulator puts students behind the controls of a medium-sized Bulldozer as they experience the reality of a typical construction site. The virtual work site features dynamic terrain with life-like dirt pushing and spreading.
Training efficiency is delivered through a modular Instructional Design that teaches real skills for productive and safe equipment operations in the field.
Pages
-
Item Number:275-190 -
This course will educate learners on best practices for maintaining general security in the workplace and safeguarding against cyber threats. -
Item Number:373-120DAC Worldwide’s Semi-Hermetic Compressor Cutaway (373-120) is an expertly-sectioned example of a common intermediate (1”-1 ½”) horsepower semi-hermetic refrigeration compressor that facilitates and supports practical training in compressor design, operating principles, and maintenance. -
Item Number:205-150The dissectible features a carefully restored, industrial shaft mounted, hollow-shaft helical gear reducer to provide learners with a realistic training experience -
Item Number:205-260Shaft-mounted, hollow-shaft helical gear reducers have a unique set of benefits. On helical gears, the tooth traces are slanted. Compared to other gears, helical gears are stronger and produce less noise because of higher meshing ratios. -
Item Number:273-945This DC shunt-wound induction motor cutaway supports industrial training activities related to electric motor types, as well as repair and troubleshooting. -
Item Number:415-000DAC Worldwide’s Shunt Wound, DC Motor Training System (415-000) features a common shunt wound DC motor used frequently throughout industry. Each motor module includes a welded aluminum mounting baseplate, aluminum control box support structure, and a steel control enclosure. -
Item Number:272-715DAC Worldwide's Dissectible Sight Flow Indicator Sample (272-715) allows for close visual inspection of a common in-line flow indicator to better understand its function, design, and operation. -
Item Number:373-652This Sightglass with Moisture Indicator Cutaway provides a full cutaway view of a sightglass that exposes the complete internal components and operating principles. -
With the Signalperson Training Station, trainees learn critical worksite skills, such as communication and teamwork, in a safe environment. The Signalperson Training Station is designed to work with CM Labs’ crane Training Packs, including Luffing Tower Crane, Flat-top Tower Crane, Crawler Crane, and Mobile Crane.
