• Lucas-Nuelle CX3226-1A7 LOTO Trainer for HV vehicles with simulated high-voltage automotive components

The Lucas-Nuelle CX3226-1A7 is a practical training system for teaching safe high-voltage isolation and lockout/tagout procedures for battery-electric, plug-in hybrid, and hybrid-electric vehicles.

Students learn to identify electrical hazards, choose an appropriate isolation method, verify that the vehicle is safe to service, investigate simulated faults, and recommission the vehicle after work is complete.

Designed For

  • Vocational schools and community colleges
  • OEM, fleet, and workforce training centers
  • High school automotive programs
  • Recognize electric-vehicle high-voltage hazards
  • Become proficient with methods of vehicle isolation
  • Investigate faults and system status
  • Verify safe working conditions
  • Reinitialize and recommission vehicles safely

Scan Tool Simulation

An integrated interface supports fault insertion and simulates a scan tool with diagnostic trouble codes and live data.

Multiple High-Voltage Isolation Methods

Training covers Live-Dead-Live measurements, manual service disconnects, 12-volt disconnection, cutting loops, high-voltage fuses, smart-key storage, scan-tool shutdown, and warnings for incorrect operation.

Simulated High-Voltage Circuit

The system represents an HV battery, contactor operation, high-voltage interlock loop, drive motor, DC/DC converter, and equipotential bonding circuit.

Guided Learning

Guided instruction modes and assessment activities reinforce correct procedures and decision-making.

Use of Real Workshop Tools

Students practice safety procedures using the same types of equipment used when servicing real vehicles.

Original Components

Authentic automotive components support safe, repeatable high-voltage training.

  • High-voltage awareness
  • High-voltage isolation methods
  • Lockout/tagout procedures
  • Safe-work-condition verification
  • Diagnostic trouble code and fault investigation
  • Safety decision-making
  • Complete vehicle isolation and lockout/tagout
  • Scan-tool shutdown
  • Incorrect isolation procedure
  • Procedure-validation failure
  • Vehicle recommissioning verification
  • High-voltage interlock fault investigation
  • Equipotential bonding fault investigation
  • Residual voltage after isolation
  • Active insulation fault
  • Unknown contactor status
  • Collision-damaged vehicle assessment
  • Authorization-limit recognition
  • Unsafe-work-condition recognition

Some exercises may require separate testing equipment.

  • Four-wire Kelvin milliohmmeter with a test current of at least 200 mA, resolution of 1 mOhm or better, and a pass threshold below 0.1 ohm
  • Insulation and voltage tester or megohmmeter supporting 500 V and 1,000 V DC, a range of at least 200 MOhm, and a CAT III or CAT IV 1,000 V rating
Download

Pages

  • 3D PrintPRO range of 3D printing fume extraction and filtration
    3D PrintPRO 3

    The BOFA 3D PrintPRO 3 incorporates an externally mounted plenum system which effectively captures fumes generated during the printing process and returns ultra clean, filtered air to the operator’s breathing zone.

    The BOFA 3D PrintPRO 3 has the benefits of low cost, low power consumption, and integral speed control. Each filtration unit is supplied with connection hoses and ‘print your own’ plenum instructions.

  • 3D PrintPRO range of 3D printing fume extraction and filtration systems
    3D PrintPRO 4

    The BOFA 3D PrintPRO 4 provides a high fume evacuation and filtration rate when connected to a large enclosed 3D printer via its extraction off take point. the system can also return the filtered clean air either back to the printer enclosure for a cleaner print area or to the operator’s breathing zone.

    The BOFA 3D PrintPRO 4 combines high flow rate with speed control within a compact free-standing unit.

  • OnRobot Collaborative Robot Accessories
    3FG15 Finger Gripper
    Item Number:
    3FG15
    With a payload of up to 15kg, the 3FG15 is ideal for gripping a wide range of cylindrical objects in machine-tending applications such as CNC lathe machines and offers seamless integration with the robots of your choice.
  • DAC Industrial Skills Training Model
    4-Variable Advanced Process Control Training System
    Item Number:
    603-000
    Hands-on exercises include industry-relevant process control skills, such as: setting and adjusting pressure switches; installation and calibration of an electronic flow measurement channel; and determining a temperature, pressure, level, and flow process’ operation characteristics.
  • AC Electronic Drive Training
    Item Number:
    970-DRV1F
    Train students and technicians on AC electronic drives using the Allen-Bradley PowerFlex 755. The Amatrol 970-DRV1F delivers hands-on VFD wiring, programming, communications, and troubleshooting with FaultPro and interactive eLearning.
  • Hands-On Electrical Skills Trainer
    AC Variable Frequency Drive Training System Plus
    Item Number:
    429E
    DAC Worldwide’s AC Variable Frequency Drive Training System Plus (429E) examines AC variable speed drive principles. Learners will explore variable frequency AC solid-state control of 3-phase electric motors in various automation applications.
  • Teach Basic Electrical Skills Hands-On
    AC/DC Electrical Learning System
    Item Number:
    T7017A
    The model T7017A includes a bench top-mount workstation, AC power supply, DC power supply, electrical components set, lead set, hand-held multimeter, circuit tester, built-in instrumentation console, electrical circuit simulation software, student learning materials for both theory and lab, and teacher’s assessment guide. This system uses industrial quality components to help students become better prepared for what they will encounter on the job.
  • Academic Software Package
    ACADEMIA software package
    VXelements is a powerful integrated 3D scanning software platform that works in complete synergy with the entire fleet of Creaform’s 3D measurement solutions. It combines both acquisition and application modules into the same simple, easy-to-use interface, providing a complete solution rather than a simple measurement device alone.
  • DAC HVAC Cutaway
    ACR Liquid Line Filter/Drier Cutaway
    Item Number:
    373-601
    DAC Worldwide’s ACR Liquid Line Filter/Drier Cutaway is a carefully-crafted, sectioned example of a commonly-encountered liquid line filter/drier.
  • DAC Worldwide Technical Trainers
    ACR Liquid Line Filter/Drier Cutaway, Bi-Directional
    Item Number:
    373-602
    This economical, sectioned example showcases the device’s operating principle, internal components, and related installation concerns. Multiple cutaways unveil all internal components, which enhances classroom training in HVAC system design, maintenance, troubleshooting, and preventive/predictive maintenance.

Pages