DAC Worldwide’s Permanent Split Capacitor Start (PSC) AC Motor Training System (411-000) is one in a comprehensive series of stand-alone, motor-related training aids that offers an introduction to a range of common motor types used in industry. This unique training aid introduces learners to the terminology, operating characteristics, wiring, and troubleshooting of PSC motors used in industry and commercially.
Simlog’s Wheel Loader Personal Simulator Version 2 puts you at the controls of a modern wheel loader equipped with either a bucket or forks, at work in a typical construction site with a dump truck or flatbed truck.
Simlog’s Hydraulic Excavator Personal Simulator puts students at the controls of a modern, sophisticated machine in interaction with an articulated dump truck. The virtual work site features dynamic terrain with life-like material.
Training efficiency is delivered through a modular Instructional Design that teaches real skills for productive and safe equipment operations in the field.
Simlog's Hydraulic Excavator Personal Simulator puts trainees at the controls of a modern Hydraulic Excavator in interaction with an articulated dump truck. Using life-like dynamic terrain combined with our intelligent instructional design, your trainees are guided through a series of 12 skill-building Simulation Modules.
Simlog's Hydraulic Excavator Personal Simulator puts trainees at the controls of a modern Hydraulic Excavator in interaction with an articulated dump truck. Using life-like dynamic terrain combined with our intelligent instructional design, your trainees are guided through a series of 12 skill-building Simulation Modules.
Watch the video for a demonstration of the Bench Loading with Truck Spotting - Boulders Module, one of 12 skill-building simulation modules of the Simlog Hydraulic Excavator Personal Simulator.
Simlog Bulldozer Personal Simulator's Boulder Control Module has trainees pushing a boulder to the target position. Each trial ends when the boulder is at the target position (the boulder will turn green), and the operator activates the horn.
Simlog Mobile Crane Personal Simulator's Pole Topping Module has trainees lifting a rubber tire load onto the tops of a series of poles in order. The target pole is marked with blue rings that will turn green once the pole has been topped.
Simlog Mobile Crane Personal Simulator's Pole Placement Module has trainees carefully lift the pole off the ground and then place it into the target hole (the target changes color as the pole gets closer) while avoiding obstacles and unstable positions.
Simlog Mobile Crane Personal Simulator's Corridor Following 4 Module has trainees move the concrete bucket along the three-section, z-shaped corridor on the ground from one end to the other, keeping the bucket at a constant height directly above the corridor while controlling sway.
Advanced Edition features lift planning exercises that require a solid understanding of load charts and Signal Person training, i.e. learning to provide appropriate signals to the crane operator (to complete a lift), while at the same time teaching that crane operator to understand and follow those signals.
Pages
-
Item Number:411-000 -
Item Number:295-901DAC's Phillips Cascade Process (LNG) System Model is a detailed and stylized scale model of a single train LNG production/conversion system, designed for training purposes. -
Item Number:428DAC Worldwide’s Piloting Switch Module (428) is a motor control-related device that compliments and expands the usefulness of related DAC Worldwide motor control training systems by incorporating alternate switch components and other devices into control circuitry as found in industrial systems. -
Item Number:295-706DAC's Piston Check Valve Cutaway (295-706) is a sectioned valve sample for training in the operation, construction, and maintenance of industrial piston-type check valves. -
Item Number:205-280DAC Worldwide's Planetary Gear Reducer Cutaway (205-280) is a sectioned industrial, mounted planetary gear reducer for use in classroom and laboratory training relating to mechanical drives. This example has been restored, cutaway, and refinished using durable coatings. -
Item Number:205-180The Planetary Gear Reducer Dissectible is a sturdy unit mounted on a 7-gauge, formed-steel baseplate with provision for bench-top, workstation, or storage rack mounting. -
Item Number:284DAC Worldwide’s Plate-Type Heat Exchanger Model (284) depicts a highly-detailed scale model of a common plate-type heat exchanger in a technically-accurate, professionally-crafted design. Based on a common make and model of a heat exchanger, the product is a complete to-scale replication of typical plate-type heat exchangers found in industry. -
Item Number:PLC HMIRockwell Automation (Allen Bradley) CompactLogix control panel electrical project kit -
Item Number:PLS 6.150DThe PLS6.150D is a free-standing platform with a materials processing envelope of 32" x 18" x 8.5" or 4,896 in³ that supports dual lasers. As a dual laser platform, the PLS6.150 can support up to two 10.6µm CO2 lasers with a power range of 10 watts to 150 watts. Additionally, it can support a single 9.3µm CO2 of 30, 50 or 75 watts. (if a 9.3µm CO2 laser is installed, only one 10.6µm CO2 of up to 75 watts may be installed at the same time.) -
Item Number:760CDAC Worldwide’s Pneumatic Component Cutaway Set (760) is a tabletop assortment of industrial pneumatic components that have been modified for classroom use as teaching aids for pneumatic component training.
