Immerse yourself in the world of hybrid and electric vehicles with our training system "MobileTrain - Diagnosis and installation of charging stations"! Are you ready to shape the future of vehicle charging and become an expert in the installation and maintenance of charging stations? Then this training system is just right for you!

With the rise of electric vehicles, the demand for competent specialists who are familiar with the installation and maintenance of charging stations is also increasing. Our training system offers you the opportunity to delve deep into the subject matter and learn all about the structure, function and safety aspects of charging stations. From identifying different types of charging stations and connection cables to assessing energy and performance requirements - we cover all the important topics.

You will not only learn about the technical and legal requirements for installation, but also how to connect charging stations in a technically correct way and test communication signals. You will also gain an insight into the protective equipment for charging stations and learn how to carry out maintenance and safety tests in accordance with national regulations. And the best thing? You can start/stop charging with an RFID card or NFC-enabled smartwatch/phone and troubleshoot potential problems on your own.

Our training system is mobile, compact and practical, making it easy to transport and set up. It includes a real practical wallbox with a high-speed charging capability of 22KW (240V 50 Amp) and enables practical commissioning and customer instruction. Thanks to various interfaces such as Ethernet, RS485, Wi-Fi and Bluetooth, networking is possible and you can perform actual vehicle charging with a maximum power of 22KW.

This training system has been specially developed for training electricians and includes not only the wallbox as an individual device, but also the installation of the supply line and its safety devices. It is very practice-orientated and prepares you to professionally inspect, test and maintain the electrical infrastructure for charging stations.

Are you ready to become part of the EV revolution and take your skills to the next level? Then sign up now for our "MobileTrain - Diagnosis and Installation of Charging Stations" training system and become a sought-after expert in the world of electric vehicles!

This video demonstrates a vertical down weld on the MOD-WELD system with a FANUC CRX Cobot.

This video goes over how to start up the CRX MOD-WELD System.

This video demonstrates a simple weld on the MOD-WELD system with a FANUC CRX Cobot.

This video demonstrates how to tack weld on the MOD-WELD system with a FANUC CRX Cobot.

This video demonstrates multi-directional welding on the MOD-WELD system with a FANUC CRX Cobot.

This video demonstrates weaving on the MOD-WELD system with a FANUC CRX Cobot.

This video demonstrates circular welding on the MOD-WELD system with a FANUC CRX Cobot.

This video demonstrates putting the FANUC CRX Cobot into a zero/shutdown position on the MOD-WELD.

  • TacMed MATTi

TacMed's Simulation™ MATTi™ Medical Simulator represents a significant advancement in simulation technology, offering a modular whole-body female medical simulator that redefines realism and effectiveness in medical education.

Key Features of MATTi™:

  • Modular Design: MATTi™ features fully-interchangeable wounded limb configurations with auto-detection, providing seamless transitions between training scenarios.
  • Real-time Feedback: The Remote Control tablet offers long-range feedback and comprehensive performance data, enhancing the learning experience.
  • Dynamic Physiology Model: Experience realistic vital signs changes based on interventions, ensuring lifelike training simulations.
  • Comprehensive Simulation: Covering critical life-saving tasks following the MARCH algorithm, MATTi™ prepares learners for real-world medical emergencies.

Why Choose TacMed's MATTi™:

  • Unparalleled Realism: MATTi™ is engineered for durability and realism, offering a lifelike training environment in any scenario or weather condition.
  • Versatility and Flexibility: With its modular design and advanced technology integration, MATTi™ provides customizable training sessions tailored to learner needs.
  • Advanced Technology: TacMed simulators leverage cutting-edge technology for real-time feedback, remote control capabilities, and comprehensive data analysis.
  • Comprehensive Training: MATTi™ covers a wide range of medical procedures, ensuring learners are prepared to handle diverse emergency situations.

Download the brochure to discover how TacMed's MATTi™ Medical Simulator can transform your medical training programs and elevate the skills of healthcare professionals. Experience the future of medical simulation with MATTi™ today.

Download

Pages

  • 3D PrintPRO range of 3D printing fume extraction and filtration
    3D PrintPRO 3

    The BOFA 3D PrintPRO 3 incorporates an externally mounted plenum system which effectively captures fumes generated during the printing process and returns ultra clean, filtered air to the operator’s breathing zone.

    The BOFA 3D PrintPRO 3 has the benefits of low cost, low power consumption, and integral speed control. Each filtration unit is supplied with connection hoses and ‘print your own’ plenum instructions.

  • 3D PrintPRO range of 3D printing fume extraction and filtration systems
    3D PrintPRO 4

    The BOFA 3D PrintPRO 4 provides a high fume evacuation and filtration rate when connected to a large enclosed 3D printer via its extraction off take point. the system can also return the filtered clean air either back to the printer enclosure for a cleaner print area or to the operator’s breathing zone.

    The BOFA 3D PrintPRO 4 combines high flow rate with speed control within a compact free-standing unit.

  • OnRobot Collaborative Robot Accessories
    3FG15 Finger Gripper
    Item Number:
    3FG15
    With a payload of up to 15kg, the 3FG15 is ideal for gripping a wide range of cylindrical objects in machine-tending applications such as CNC lathe machines and offers seamless integration with the robots of your choice.
  • DAC Industrial Skills Training Model
    4-Variable Advanced Process Control Training System
    Item Number:
    603-000
    Hands-on exercises include industry-relevant process control skills, such as: setting and adjusting pressure switches; installation and calibration of an electronic flow measurement channel; and determining a temperature, pressure, level, and flow process’ operation characteristics.
  • AC Electronic Drive Training
    Item Number:
    970-DRV1F
    Train students and technicians on AC electronic drives using the Allen-Bradley PowerFlex 755. The Amatrol 970-DRV1F delivers hands-on VFD wiring, programming, communications, and troubleshooting with FaultPro and interactive eLearning.
  • Hands-On Electrical Skills Trainer
    AC Variable Frequency Drive Training System Plus
    Item Number:
    429E
    DAC Worldwide’s AC Variable Frequency Drive Training System Plus (429E) examines AC variable speed drive principles. Learners will explore variable frequency AC solid-state control of 3-phase electric motors in various automation applications.
  • Teach Basic Electrical Skills Hands-On
    AC/DC Electrical Learning System
    Item Number:
    T7017A
    The model T7017A includes a bench top-mount workstation, AC power supply, DC power supply, electrical components set, lead set, hand-held multimeter, circuit tester, built-in instrumentation console, electrical circuit simulation software, student learning materials for both theory and lab, and teacher’s assessment guide. This system uses industrial quality components to help students become better prepared for what they will encounter on the job.
  • Academic Software Package
    ACADEMIA software package
    VXelements is a powerful integrated 3D scanning software platform that works in complete synergy with the entire fleet of Creaform’s 3D measurement solutions. It combines both acquisition and application modules into the same simple, easy-to-use interface, providing a complete solution rather than a simple measurement device alone.
  • DAC HVAC Cutaway
    ACR Liquid Line Filter/Drier Cutaway
    Item Number:
    373-601
    DAC Worldwide’s ACR Liquid Line Filter/Drier Cutaway is a carefully-crafted, sectioned example of a commonly-encountered liquid line filter/drier.
  • DAC Worldwide Technical Trainers
    ACR Liquid Line Filter/Drier Cutaway, Bi-Directional
    Item Number:
    373-602
    This economical, sectioned example showcases the device’s operating principle, internal components, and related installation concerns. Multiple cutaways unveil all internal components, which enhances classroom training in HVAC system design, maintenance, troubleshooting, and preventive/predictive maintenance.

Pages