The AM-CERT cell was specifically designed for Advanced Manufacturing training. Learn robot to PLC interface, PLC ladder logic, operator interface, safety, mechatronics, and iRVision all in one cell. Certified for Material Handling, Level II and III Training.
Offering a variety of production-grade thermoplastics, FDM® technology creates parts that are highly accurate, tough, and suitable for both functional prototyping and end-use parts. ABS is the most common material used as it boasts good mechanical properties and high name recognition. Compared with ASA, ABS may be more familiar because of its popularity in mass production.
ASA is another popular all-purpose material for jigs and fixtures, manufacturing aids, prototyping and limited-run end-use parts. ASA matches or exceeds the mechanical properties of standard ABS and has greater heat resistance. Moreover, ASA demonstrates exceptional UV stability and, with its matte finish, offers the best aesthetics of any FDM thermoplastic. It’s especially suited for end-use parts in outdoor commercial and infrastructure applications, and its wide array of color options surpasses that of ABS.
FDM® TPU 92A is a thermoplastic polyurethane with a Shore A value of 92. The material exhibits high elongation, superior toughness, durability, and abrasion resistance.
FDM TPU 92A brings the benefits of elastomers to FDM 3D printing and can quickly produce large and complex elastomer parts. Typical applications include flexible hoses, tubes, air ducts, seals, protective covers, and vibration dampeners.
FDM TPU 92A is available on the F123™ Series 3D Printers and is compatible with QSR™ soluble support material.
Produce Large and Complex Elastomer Parts
Create accurate elastomer parts quickly and efficiently with the ease and reliability of professional FDM 3D printing. The durable elasticity of FDM TPU 92A material makes it a good choice for a variety of applications, including flexible hoses, tubes, air ducts and vibration dampeners.
FDM® HIPS (high-impact polystyrene) is a low-cost, general-use 3D printing thermoplastic. It offers similarities to ABS but has high impact resistance making it suitable for printing lower-requirement jigs, fixtures, and prototypes at a reduced cost.
Kimya PC-FR is a polycarbonate FDM® 3D printing filament with flame-retardant properties developed specifically for additive manufacturing. It retains the beneficial characteristics of standard polycarbonate, such as dimensional stability, high glass transition temperature, and high impact resistance.
Kimya PC-FR is a polycarbonate (PC) based material with flame-retardant properties developed specifically for additive manufacturing. It retains the beneficial characteristics of standard polycarbonate such as dimensional stability, high glass transition temperature, and high impact resistance.
Key Attributes
- Flame-resistant material
- Electrical insulator
- Good dimensional stability
- Meets or exceeds the mechanical performance of Stratasys PC material
- Compatible with soluble support
- Meets EN 45545-2 and NFPA 130 standards
- Slice heights: 10
Nylon 12 is a semi-crystalline, FDM® thermoplastic. As with other semi-crystalline materials used in traditional manufacturing processes, special considerations should be implemented to ensure an optimal part is obtained. The information in this document illustrates the following considerations:
- Tip Selection
- Build Modes
- Porosity
- Sacrificial Tower Features
- Build Sheets
- Support Removal
- Annealing
FDM® Nylon 12 filament is the 3D printing equivalent of standard industrial PA12 (polyamide 12) material. A strong engineering thermoplastic that exhibits toughness and high impact strength without being brittle. Its excellent fatigue properties make it a good option for repetitive-flex applications such as snap-fit clips, closures, and press-fit inserts.
Other applications include jigs, fixtures, low-volume production parts, and accurate prototyping of nylon 12 high-volume injection molded parts. FDM Nylon 12 is available in black.
FDM® Nylon-CF10 is a composite material combining a blended nylon polymer with 10% chopped carbon fiber (by weight), enhancing the material’s strength and rigidity. The nylon base polymer also gives FDM Nylon-CF10 good chemical resistance.
FDM® Nylon 12CF™ is a PA12 (polyamide 12) thermoplastic filament reinforced with chopped carbon fiber, 35% by weight. It has the highest flexural strength of any FDM thermoplastic, resulting in the highest stiffness-to-weight ratio. The combination of high strength, stiffness, and light weight makes it an optimal replacement for heavier metal components in appropriate use cases.
Typical applications include strong, lightweight tooling, functional prototyping and select end-use parts.
Pages
-
Item Number:AM-CERT -
Item Number:203E-PACIndustrial maintenance technicians must learn to operate, maintain, troubleshoot, and repair a wide variety of mechanical systems used to manufacture products. One of the key diagnostic tools technicians will use during preventive maintenance as well as to maintain optimum efficiency is vibration analysis. -
Item Number:278-180DAC Worldwide’s Air Operated Diaphragm Pump Cutaway (Wilden/ARO/Price) (278-180) depicts a sectioned industrial air-operated, double-diaphragm pump (AOD) cutaway that supports realistic classroom training in the operation, construction, and maintenance of this common process pump used in various industry sectors. -
Item Number:283DAC Worldwide’s Air-Cooled (Fin-Fan) Heat Exchanger Model (283) displays a scale version of an air-cooled, fin-tubed heat exchanger used in refineries, petrochemical plants, gas treating plants, power plants, and more. Air-cooled heat exchangers (ACHE), also called fin-fans or air coolers, cool or condense hot fluid in industrial process applications by passing ambient air over and between tubes used to move the fluid. The heated air is then discharged into the atmosphere. -
Item Number:275-180DAC Worldwide’s Air-Operated Diaphragm Pump Dissectible (Wilden/Aro/Price) (275-180) is a realistic dissectible industrial pump for use in classroom and laboratory training relating to process pumps. -
Train airport ground support crews in a safe, immersive environment with the Acron Aviation Airside Pushback™ Simulator. Realistic vehicle dynamics, 4K visuals, and Replay Studio™ After-Action Review software improve performance and reduce risk. -
Item Number:TFX-APLPB-1The TacMed Simulation AirwayPlus Lifecast Upper (APL) trains responders to perform life-saving tasks such as maintaining a patient’s airway, needle decompression, chest tube insertion, cricothyroidotomy, and Intraosseous (I/O) infusion. -
AlienGo is the A1's big brother. Stokes Education curriculum is included in our education package. Our curriculum has students work with community partners to utilize the robot in addressing real-world problems. -
For agriculture skills training, Amatrol offers training programs that feature a combination of learning methods to engage students' learning styles. Amatrol's training solutions include eLearning curriculum and hands-on, industrial-quality training systems for both industry and education settings. -
Item Number:850-AECAmatrol’s Alternative Energy Learning System – Wind and Solar (850-AEC) covers basic alternative energy training through a combination of eLearning curriculum and hands-on experience.
