DAC Worldwide’s External Gear Pump Dissectible (275-135) is a realistic industrial pump for use in classroom and laboratory training relating to process pumps.
Amatrol’s Mechatronics Learning System – AB CompactLogix L16 (870-AB53A) provides an Allen-Bradley programmable logic controller (PLC) used by learners in conjunction with Amatrol’s Mechatronics Training for Industrial Automation to program, operate, and adjust components and applications on an automated production line. PLCs are a vital part of modern industry and are used in innumerable applications across the automotive, manufacturing, packaging, and pharmaceutical industries, just to name a few. Each of Amatrol’s Mechatronics carts requires one 870-AB53A, so you can buy one cart to train on a specific skill, such as indexing, pick-and-place, or gauging, or buy the entire Mechatronics system to recreate a fully functional automated line in your classroom or training center!
Amatrol’s Mechatronics Learning System – Siemens S7-1500 (870-S715) provides a Siemens S7-1500 programmable logic controller (PLC) with 2-port PROFINET switch used by learners in conjunction with Amatrol’s Mechatronics system to program, operate, and adjust components and applications on an automated production line. PLCs are a vital part of modern industry and are used in innumerable applications across the automotive, manufacturing, packaging, and pharmaceutical industries, just to name a few. Each of Amatrol’s Mechatronics carts requires one Siemens PLC programming learning system, so you can buy one cart to train on a specific skill, such as indexing, pick-and-place, or gauging, or buy the entire Mechatronics system to recreate a fully functional automated line in your classroom or training center!
The Siemens S7-1500 learning system includes a SIMATIC S7-1500 PLC with a PLC mounting console, a 24 VDC power supply, a master control relay, interactive multimedia curriculum, an install guide, and student reference guides. This industrial PLC training system covers major topic areas such as mechatronics safety, electrical sensors, actuator adjustment, stepper motor programming, torque adjustment, discrete I/O handshaking, system startup/halt, and much more! Amatrol’s Mechatronics and PLC training is second-to-none. Featuring real-world industrial components and PLCs, these learning systems will help learners gain hands-on skills and knowledge that can be applied to real, on-the-job tasks.
Amatrol’s Pegasus II Robotic Learning System (880-RA21B) teaches articulated arm servo robotics and how it’s applied in industrial tasks like assembly, material handling, machine tending, gluing, and inspection. This Pegasus Robotic training system includes 5-axis articulated servo robot arm with a 360 degree work envelope, industrial controller, and state-of-the-art teach pendant which are used to practice over 140 executable commands using the powerful MCL II language.
The Pegasus Robotic training also includes world-class curriculum which covers major topic areas like basic robot operation and programming to accomplish hands-on skills such as jogging a servo robot using the teach pendant, entering and editing a basic robot program, and designing a robot program to perform a basic material handling task. The combination of theoretical knowledge and hands-on practice allows learners to gain both conceptual and practical knowledge, which broadens their competency in robotic applications. This is just one reason why Amatrol is the world-leader in skills-based, interactive technical learning.
Amatrol’s PLC Troubleshooting Learning System - AB ControlLogix (890-AB5500) teaches troubleshooting, programming, and applications of Allen-Bradley’s ControlLogix PLC. The programmable controller is considered by many to be the most important development ever in industrial automation, because it is a prepackaged, industrially-hardened computer that can be quickly programmed to control a wide range of industrial processes and machines. The A-B ControlLogix training system adds to the Programmable Controller Troubleshooting Workstation (890-PECB) and also requires a computer and RS Logix 5000 PLC programming software.
The A-B ControlLogix training system includes an Allen-Bradley PLC with ControlLogix 5000 processor, an I/O Connector Kit, and a Fault Insertion Engineering Integration and Connector Kit. These components will be used to cover a wide variety of PLC topics, applications, and skills, such as PLC operation, communications, programming, motor control, I/O interfacing, timer and counter instructions, and systems and I/O troubleshooting. The ControlLogix 5000 is a PLC that learners will actually find in automated manufacturing facilities and other industrial settings, so the skills and knowledge that they gain from the A-B ControlLogix training system will be directly applicable to real-world environments.
Amatrol’s Programmable Controller Troubleshooting Workstation (890-PECB) teaches programming and troubleshooting of programmable logic controllers (PLCs) and their use in industrial, commercial, and residential applications. The PLC Troubleshooting Workstation teaches PLC troubleshooting like no other product by providing a hands-on learning station that models real world PLC-controlled machines with up to 40 faults that can be inserted into the system. It’s the first product to offer a realistic PLC troubleshooting experience for students, because the faults are inserted throughout the system, including inside the PLC!
Hands-On Maintenance & Troubleshooting Skills
Amatrol’s Central Lubrication Learning System (950-CL1) teaches learners valuable central lubrication maintenance and troubleshooting skills. Central lubrication systems are used throughout industry, and learners using the central lubrication training system will gain hands-on skills operating, maintaining, and troubleshooting both piston distributor and series/progressive valve lubrication systems.
The central lubrication training system features an electric pump and a programmable system controller. Users will learn how to operate and program these industry-standard components, gaining real-world experience with the types of equipment they’ll encounter on the job. Learners will also study a variety of other topics, including oils, greases, and lubricant management.
Amatrol’s 950-GEO2D Geothermal Troubleshooting Learning System with Desuperheater uses an exposed component layout so that learners can see each component’s role in a geothermal system. Learners can easily observe, monitor, and test each component mounted and labeled on a vertical panel. Sight glasses installed in the 950-GEO2 allow the learner to see the refrigerant’s changing state as it passes through the system. Amatrol also includes pressure and temperature gauges at key points to show the system’s performance at a glance. Additionally, the system includes a custom designed, temperature-controlled ground simulator so the system can run continuously.
The 950-GEO2D is equipped with FaultPro, Amatrol’s premier electronic fault insertion program for teaching troubleshooting skills. Using FaultPro, learners troubleshoot electrical, mechanical, and fluid-based faults to become effective real-world experts on residential and commercial geothermal systems. In addition to troubleshooting, the interactive multimedia curriculum and hands-on skills will teach startup, operation, shutdown, and maintenance of a geothermal system.
Amatrol’s Hydraulic Maintenance Learning System (950-HM1) teaches skills related to servicing and maintaining hydraulic systems and components. Hydraulic systems are used in innumerable industrial areas like automotive, packaging, pharmaceutical, and food processing. This learning system provides a valuable learning experience for industrial maintenance technicians, system installers, and many others by covering hydraulic filter and fluid maintenance, fittings, seals, hydraulic hose and clamping devices, hydraulic tubing, and hydraulic component installation.
This system includes a mobile workstation, hose set and tubing rack, flush cart module, fittings module, component panel, and fluid servicing kit. Amatrol uses industry-standard components on its systems to ensure that learners gain hands-on practice with mechanisms they’ll use on-the-job. This improves both confidence and competency when performing tasks like replacing a spin-on filter or strainer, adding fluid to a hydraulic system, installing an O-ring seal, bleeding a hydraulic cylinder, or mounting and aligning a hydraulic cylinder.
Amatrol’s Hydraulic Troubleshooting Learning System (950-HT1) teaches advanced hydraulic troubleshooting like no other product by providing a hands-on learning station that models a real world hydraulically-powered machine and includes over 40 faults that can be inserted into the system. The 950-HT1 is the first product to offer a realistic electrical component troubleshooting experience for students, because the faults are inserted throughout the system, including the hydraulic, mechanical and electrical components.
Amatrol’s Basic Hydraulic Troubleshooting Learning System (950-HTB1) teaches learners how to troubleshoot hydraulic systems and their components, such as hydraulic motors, directional control valves, and cylinders. The system combines comprehensive curriculum with real-world equipment to create a valuable learning experience for maintenance technicians across a wide variety of industries. It also provides a strong foundation for those seeking important industry-standard certifications.
The hydraulic troubleshooting system features over 35 manually-inserted faults to help learners understand and practice troubleshooting common problems found in hydraulic systems. Sample faults include: motor starter failure, defective pump, worn cylinder seals, blocked flow control valves, and blocked inlet ports.
Pages
-
Item Number:275-135 -
Item Number:778-110DAC Worldwide’s Hydraulic Gear Pump Cutaway, External-Type (778-110) is an industrial hydraulic gear pump that has been sectioned to reveal the inner workings of this component. This exposure allows learners to understand the design, operation, construction, and maintenance of this common process pump used throughout the industry. -
Item Number:F190CR and F370CRIt starts with high-strength composite materials, but the Stratasys composite-ready F Series offers much more. More materials, more reliability – more capability than other similar printers. -
The Fall Protection awareness simulation is ideal for future employees and supervisors who will work in or around construction environments. The primary goal of this course is to teach workers safe procedures when working at heights on a construction site. -
Item Number:202-000DAC Worldwide’s Fan Balancing Trainer (202-000) is a precision assembly allowing for convenient demonstration and training in fan balancing and other vibration analysis-related topics. Based on the design of a typical squirrel cage fan, this heavy-duty aluminum device allows for assembly in a variety of configurations, creating a broad range of balancing scenarios. -
Item Number:202-PACDAC Worldwide’s Fan Balancing Training System Plus (202-PAC) is a hands-on industrial training system that allows learners to gain experience with fan balancing to achieve maximum fan efficiency and stability. -
A large working envelope with a reach of 717 mm, and a payload of 7 kg, combine to provide solutions for high productivity handling and assembly applications. -
With FANUC Robotics’ CERT Program, new courses and project based activities prepare students for a workplace that will be increasing in robotic automation. The Fanuc Robotics Education Training Cart incorporates the compact M-1+A robot housed in a self contained, mobile enclosure. The lightweight parallel-link M-1+A robot is designed for small part handling, high speed picking and assembly applications. -
FANUC America now offers Certified Education Robot Training (CERT) to qualifying High Schools, Community Colleges, and Universities. With FANUC America's educational robots, students can learn to utilize the latest automation technology while applying Science, Technology, Engineering, and Math. Industrial robotics training in the classroom can safely be achieved through the CERT program. FANUC America provides the necessary training to the instructor as well as a curriculum to introduce students to robot applications. -
The FANUC CNC Certified Education Training program is an industry certification available to qualified high schools, community colleges, and universities. The program certifies instructors at educational institutions to train their students to program, set-up and operate CNC machine tools using FANUC’s control platform.
