DAC Worldwide’s Boiler Tube Trainer (240-000) is a heavy-duty fixture for convenient classroom or laboratory training in the removal and installation of tubes in industrial fire tube boilers. Based on the geometry and materials of a common Scotch marine boiler, this device allows for repeated practice in the maintenance of tubes without jeopardizing actual equipment, or consuming unnecessary floor space.
Simlog’s Wheel Loader Personal Simulator Version 2 puts you at the controls of a modern wheel loader equipped with either a bucket or forks, at work in a typical construction site with a dump truck or flatbed truck.
Simlog’s Hydraulic Excavator Personal Simulator puts students at the controls of a modern, sophisticated machine in interaction with an articulated dump truck. The virtual work site features dynamic terrain with life-like material.
Training efficiency is delivered through a modular Instructional Design that teaches real skills for productive and safe equipment operations in the field.
Simlog's Hydraulic Excavator Personal Simulator puts trainees at the controls of a modern Hydraulic Excavator in interaction with an articulated dump truck. Using life-like dynamic terrain combined with our intelligent instructional design, your trainees are guided through a series of 12 skill-building Simulation Modules.
Simlog's Hydraulic Excavator Personal Simulator puts trainees at the controls of a modern Hydraulic Excavator in interaction with an articulated dump truck. Using life-like dynamic terrain combined with our intelligent instructional design, your trainees are guided through a series of 12 skill-building Simulation Modules.
Watch the video for a demonstration of the Bench Loading with Truck Spotting - Boulders Module, one of 12 skill-building simulation modules of the Simlog Hydraulic Excavator Personal Simulator.
Simlog Bulldozer Personal Simulator's Boulder Control Module has trainees pushing a boulder to the target position. Each trial ends when the boulder is at the target position (the boulder will turn green), and the operator activates the horn.
Simlog Mobile Crane Personal Simulator's Pole Topping Module has trainees lifting a rubber tire load onto the tops of a series of poles in order. The target pole is marked with blue rings that will turn green once the pole has been topped.
Simlog Mobile Crane Personal Simulator's Pole Placement Module has trainees carefully lift the pole off the ground and then place it into the target hole (the target changes color as the pole gets closer) while avoiding obstacles and unstable positions.
Simlog Mobile Crane Personal Simulator's Corridor Following 4 Module has trainees move the concrete bucket along the three-section, z-shaped corridor on the ground from one end to the other, keeping the bucket at a constant height directly above the corridor while controlling sway.
Advanced Edition features lift planning exercises that require a solid understanding of load charts and Signal Person training, i.e. learning to provide appropriate signals to the crane operator (to complete a lift), while at the same time teaching that crane operator to understand and follow those signals.
Pages
-
Item Number:240-000 -
Item Number:220-000DAC Worldwide’s Brake Clutch Trainer (220-000) is a complete, motorized training package of brake and clutch-related hardware and control components. -
Item Number:220-PACPDAC Worldwide’s Brake Clutch Training System (220-PACP) is a complete, motorized training package of brake and clutch-related hardware and control components. -
Item Number:DZRSimlog's Bulldozer simulation software can also be configured, in order to simulate the behavior of a wide variety of bulldozers. For example, you can use separate pedals for Decelerator and Brake, or just a single pedal that combines both functions, to reproduce the different pedal arrangements found in real bulldozers. -
Item Number:254DAC Worldwide’s Butterfly Valve Cutaway, 4” - 6” (254) is a sample industrial butterfly valve that has been carefully sectioned and color-coded to train learners in the operation, construction, and maintenance of butterfly valves. The cutaway exposes and showcases the complete internal configuration of an industrial butterfly valve. Moreover, seal features and hardware locations have been retained to allow realistic, hands-on valve maintenance training. -
Item Number:701-02 / 720-02 / 711-01LJ Create's CAN Systems Desktop Trainers give students an introduction to CAN systems and provide them with the working knowledge to diagnose and solve CAN bus problems. -
Item Number:275-140DAC's Canned Sealless, Centrifugal Pump Dissectible (Crane/Chempump) (275-140) is an industrial pump for training relating to process pumps. -
Item Number:CO3221-6SThis training system focuses on the digitally networked CAN-bus battery management system in a traction battery and on the corresponding components. -
Item Number:373-991DAC Worldwide’s Ceiling Unit Cooler System Cutaway is a professionally-crafted, sectioned example of a refrigeration system fragment, including ceiling unit cooler with associated components, as used in commercial refrigeration systems relating to food preservation applications. -
Item Number:950-CL1Amatrol’s Central Lubrication Learning System (950-CL1) is for hands-on training in operating, maintaining, and troubleshooting piston distributor and series/progressive valve lubrication systems—plus oils, greases, and lubricant management.
