The Stratasys MediJet™ is setting a new standard for medical printing. With multiple materials and multicolor capabilities, you can create brilliantly vivid anatomical models and drilling and cutting guides* that are sterilizable and biocompatible - all on a certified system.
Simlog Off-Highway Truck Personal Simulator's Complete Haul Cycle 2 Module has trainees drive the truck from the dumping zone to the wheel loader. After the truck is fully loaded by the loader, return the dumping zone, dump the load and drive away.
Simlog's Reach Lift Truck Personal Simulator: Slalom 1 Forward Driving - pick up the load, drive forward through the slalom course, and place the load on the floor at the target position defined by a red outline.
Simlog's Reach Lift Truck Personal Simulator: Slalom 2 - Pick up the load, drive in reverse through the slalom course, and place the load on the floor at the target position defined by a red outline.
Simlog's Reach Lift Truck Personal Simulator: Selective Pallet Racks 2, Standard Aisles - Working with selective pallet racks, pick up each marked load and place it at its target position, using the overhead map for guidance. The loads and their target positions are mixed among the various heights of rack shelves.
Simlog's Reach Lift Truck Personal Simulator: Selective Pallet Racks, Narrow Aisles - working with selective pallet racks, pick up each marked load and place it at its target position, using the overhead map for guidance. The loads and their target positions are mixed among the various heights of rack shelves.
Simlog Mining Truck Personal Simulator - Corridor Driving Module: Trainees drive the truck through the corridor to the target. The trial ends when the truck is over the target and parked (gear in Park or Neutral with parking brake engaged).
Simlog Mining Truck Personal Simulator - Complete Haul Cycle 1 Module: Trainees drive the truck from the dumping zone to the rope shovel and position the truck under the dipper (the shovel's horn will sound when the truck is appropriately positioned).
After the truck has been fully loaded (the shovel's horn will sound when the loading is complete), return to the dumping zone, dump the load and drive away.
Simlog Electric Rope Shovel - Following Grade Module: make the rightmost dipper tooth follow the line (the cursor changes color as the tooth moves away from the line). The trial ends when the tooth reaches the end of the line, and the operator activates the horn.
Simlog Electric Rope Shovel - Single-Pass Digging Module: Fill the dipper by digging at the rock face. The trial ends when there is material in the dipper, the dipper is no longer in contact with the rock face, and the operator activates the horn.
Simlog’s Bulldozer Personal Simulator puts students behind the controls of a medium-sized Bulldozer as they experience the reality of a typical construction site. The virtual work site features dynamic terrain with life-like dirt pushing and spreading.
Training efficiency is delivered through a modular Instructional Design that teaches real skills for productive and safe equipment operations in the field.
Pages
-
-
Item Number:204J-000Tech-Labs technical training solutions. -
Item Number:204J-PACDAC Worldwide’s Journal and Fluid-Film Bearing Training System Plus (204J-PAC) is a realistic, heavy-duty learning aide that allows for convenient and consistent training in the identification, installation, removal, and maintenance of a variety of babbet-type journal bearings found on high horsepower, high-speed rotating machines that have high loads. -
Item Number:TFX-K9DSL-1TacMed Solution's Advanced Canine Medical Trainer (K9 Diesel) is a full-body simulator for Operational Canine First Responders, Military Working Dog (MWD) handlers, Veterinarians, and Veterinary Technicians. -
Item Number:TFX-K9-HERO-1TacMed Simulation K9 HERO is a state-of-the-art skills trainer that allows learners to perform critical life-saving tasks such as maintaining an airway, needle decompression/thoracocentesis, hemostasis, IV insertion, Intraosseous (I/O) infusion, CPR, tracheostomy, and bandaging. -
Item Number:288DAC Worldwide’s Kettle Type Reboiler Heat Exchanger Training Model (288) depicts a highly-detailed scale model of a kettle-type reboiler in a technically-accurate, professionally-crafted design that supports training in the operation and maintenance of industrial heat exchangers. -
Item Number:209DAC Worldwide's Kingsbury Thrust Bearing Model (209) is a plastic facsimile of a Kingsbury fluid film thrust bearing that allows for classroom instruction in the design, maintenance, and application of fluid film bearings used in industry. -
Teaching the basics of ladder health and safety can help prevent potential injuries and inform others on how to identify if a ladder is a potential risk. The Ladder Safety simulation is ideal for future employees or supervisors who will work in or around work environments that utilize ladders. -
Item Number:295-696DAC Worldwide’s LACT Component Cutaway and Demonstration Package (295-696) is a full-size, realistic mock-up of a generic LACT unit that has been purposefully modified for classroom training through the inclusion of multiple system component cutaways. -
Item Number:T5552FAmatrol’s Level and Flow Process Control Troubleshooting Learning System (T5552F) covers calibration, installation, operation, and troubleshooting for flow and liquid level process control systems.
