Amatrol's newest advanced manufacturing trainer is the Portable Smart Manufacturing Learning System (990-SM10). Developed in partnership with CESMII, this system is designed to provide hands-on learning in Smart Manufacturing and Industry 4.0 technologies.
The Lucas-Nuelle CX3226-1A7 is a practical training system for teaching safe high-voltage isolation and lockout/tagout procedures for battery-electric, plug-in hybrid, and hybrid-electric vehicles.
Students learn to identify electrical hazards, choose an appropriate isolation method, verify that the vehicle is safe to service, investigate simulated faults, and recommission the vehicle after work is complete.
Designed For
- Vocational schools and community colleges
- OEM, fleet, and workforce training centers
- High school automotive programs
- Recognize electric-vehicle high-voltage hazards
- Become proficient with methods of vehicle isolation
- Investigate faults and system status
- Verify safe working conditions
- Reinitialize and recommission vehicles safely
Scan Tool Simulation
An integrated interface supports fault insertion and simulates a scan tool with diagnostic trouble codes and live data.
Multiple High-Voltage Isolation Methods
Training covers Live-Dead-Live measurements, manual service disconnects, 12-volt disconnection, cutting loops, high-voltage fuses, smart-key storage, scan-tool shutdown, and warnings for incorrect operation.
Simulated High-Voltage Circuit
The system represents an HV battery, contactor operation, high-voltage interlock loop, drive motor, DC/DC converter, and equipotential bonding circuit.
Guided Learning
Guided instruction modes and assessment activities reinforce correct procedures and decision-making.
Use of Real Workshop Tools
Students practice safety procedures using the same types of equipment used when servicing real vehicles.
Original Components
Authentic automotive components support safe, repeatable high-voltage training.
- High-voltage awareness
- High-voltage isolation methods
- Lockout/tagout procedures
- Safe-work-condition verification
- Diagnostic trouble code and fault investigation
- Safety decision-making
- Complete vehicle isolation and lockout/tagout
- Scan-tool shutdown
- Incorrect isolation procedure
- Procedure-validation failure
- Vehicle recommissioning verification
- High-voltage interlock fault investigation
- Equipotential bonding fault investigation
- Residual voltage after isolation
- Active insulation fault
- Unknown contactor status
- Collision-damaged vehicle assessment
- Authorization-limit recognition
- Unsafe-work-condition recognition
Some exercises may require separate testing equipment.
- Four-wire Kelvin milliohmmeter with a test current of at least 200 mA, resolution of 1 mOhm or better, and a pass threshold below 0.1 ohm
- Insulation and voltage tester or megohmmeter supporting 500 V and 1,000 V DC, a range of at least 200 MOhm, and a CAT III or CAT IV 1,000 V rating
Pages
-
Item Number:990-SM10 -
Item Number:211-140DAC Worldwide’s Positive Displacement Blower Cutaway, Rotary Lobe-Type (211-140) is a full-size, fully-detailed sectioned rotary lobe-type positive displacement compressor that provides learners a first-hand view into a component that is found in various applications worldwide. -
Item Number:211-110DAC Worldwide’s Positive Displacement Compressor Cutaway, Piston-Type (211-110) is a realistic, sectioned, piston-type positive displacement compressor. Rather than a scale model, the cutaway is a piece of actual industrial hardware sourced from popular industrial makes and models. T -
Item Number:272-980DAC Worldwide's Pressure Control Switch Sample Dissectible (272-980) is a realistic dissectible sample of a common industrial control-type pressure switch as used in automation and process systems. -
DAC Worldwide's Pressure Switch Sample Dissectible (272-981) is a realistic dissectible sample of a common industrial pressure switch. -
Item Number:278-195DAC Worldwide’s Progressive Cavity Pump Cutaway – Moyno/Roper (278-195) depicts a sectioned industrial progressing cavity pump that allows for convenient classroom or laboratory training in the operating characteristics, construction, and maintenance of these common process pumps used in a variety of sectors. -
Item Number:ELL/4000The unit is used manually, with flows controlled by manual valves and flowmeters. The unit has a 2"-diameter glass column, which enhances the visual experience of the extraction process. A pneumatic pulsator increases the contact between the two phases and mass transfer. Students learn how to determine the interphase level, material balance, efficiency of the column, and more. -
Item Number:869-PACDAC Worldwide’s Pump Impeller Sample Board (869-PAC) is a hands-on teaching aid that is designed to supplement courses in pump operation and maintenance. This rack-mounted identification panel accommodates magnetic identification tags relating to the impellers supplied, allowing association with the appropriate impeller by the student. -
Item Number:275E-PACDAC Worldwide’s Pump Maintenance and Alignment Training System Plus (275E-PAC) is a realistic benchtop training system for industrial pumps. Using an actual standard ANSI centrifugal pump, the training system allows for instruction in the complete tear-down and assembly procedure for this common pump type. -
Item Number:280-000Hands-On Technical TrainersDAC Worldwide’s Pump Packing / Mechanical Seal Trainer (280-000) is a unique, multi-purpose demonstration device related to training in industrial pump sealing systems. The trainer supports basic introductory training in pump packing / mechanical seal operation, and gives learners a first-hand view into a component that is found in various maintenance applications worldwide.
