Amatrol’s 950-TNC1 Turbine Electric Hub Troubleshooting Learning System allows students to learn the skills required for wind turbine operation, adjustment, and troubleshooting.
The Electric Torque Wrench Learning System (95-PAS3) teaches learners how to use a high-speed, precise torque tool. Precision assembly requires accurate fastener tension in bolted assemblies. Amatrol's Electric Torque Wrench training system teaches the operation and application of electric torque wrenches with threaded fasteners.
The Stall Bar Training System (95-PAS4) teaches learners how to use a stall bar torque tool to assemble threaded fasteners. These are often used in assembly operations requiring very accurate torque.
Amatrol's Instrumented DC-Electric Torque Wrench Learning System (95-PAS5) adds to the Production Assembly Training System (950-PAS1) to teach use of an instrumented impulse torque wrench in fastener assembly. This production assembly training system includes a right-angle nutrunner, control box and cable, 3/8-in. drive 19mm socket, and a 90-degree flange. This system covers instrumented impulse torque wrenches through skills like DC electric controlled tool operation and inspection and how to assemble a threaded fastener using a DC electric controlled tool.
Hands-On Skills with Parallel and Series Pumps
Amatrol’s Multiple Pump Learning System (95-PM1-A) adds onto Amatrol’s Pumps training system (950-PM1) by including an additional centrifugal pump and electric motor, allowing learners to study the functions and real world applications of series and parallel pumps. This industrial pump training system presents practical skills such as pump installation and pump operation for series and parallel pumps with theoretical knowledge like measuring and graphing flow/pressure characteristics and calculating pump efficiency.
Pump Maintenance and Troubleshooting
The Turbine Pump Learning System (95-PM1-B) explores an exceptionally versatile industrial pump that’s used in many environments, such as water treatment plants, paper mills, ski resorts, farms, and airports. When integrated with Amatrol’s centrifugal pumps training system (950-PM1), this system allows learners to get training on different types of turbine pumps, their functions and applications, and their flow/pressure characteristics. This system also explains pump installation, pump maintenance, pump troubleshooting, and how to disassemble a turbine pump.
Hands-On Skills with Parallel and Series Pumps
The Diaphragm Pump Learning System (95-PM1-C) explains the function, operation, application, and variety of diaphragm pumps. Diaphragm pumps are used to transfer fluid that’s too viscous, corrosive, abrasive, or hot for other types of industrial pumps, making it a perfect choice for moving food products such as peanut butter, ink for the print industry, and pulp, paper, and petroleum products. The diaphragm pump training system explores how to adjust a diaphragm pump flow rate, how to select the right diaphragm pump for an application. It also covers pump installation, pump maintenance, disassembly, and pump troubleshooting.
Pump Maintenance & Troubleshooting Skills
The Peristaltic Pump Learning System (95-PM1-D) covers the function, operation, and maintenance of peristaltic pumps, which are used in a variety of applications within the chemical, food, pharmaceutical, and biotechnological industries. This versatile pump keeps fluid uncontaminated as it moves through the system by utilizing a tubing system that prevents direct contact with the pump’s working parts. As an example, peristaltic pumps are used to filter and circulate blood throughout the body during heart surgery. This industrial pump training system also discusses peristaltic pump components, how to reduce pulsation, how to calculate and adjust the flow rate, and how to select proper tube sizes.
Pump Maintenance and Troubleshooting
The Piston Pump Learning System (95-PM1-E) provides learners with an in-depth overview of the piston pump, which has been in use longer than any other type of pump. The piston pump produces high pressure fluid flow of water, soaps and detergents in various applications within the aerospace, marine, agriculture, and auto industries. Within the world-class curriculum, learners will study piston pump set-up, operation, flow/pressure characteristics, maintenance, and troubleshooting for this highly efficient pump. Learners will also study how to connect the pump to a motor, how to adjust the flow rate, and how to calculate theoretical and actual flow rates.
Industrial Pump Maintenance and Troubleshooting
The Gear Pump Learning System (95-PM1-F) covers the function, operation, installation, and maintenance of the versatile gear pump. This low maintenance pump can transfer a wide array of fluids and fluid viscosities for spraying, recirculating, cleaning, and fluid transfer applications. One of the most common applications of a gear pump is in an automobile’s automatic transmission. This industrial pumps training system also provides information on pump inspection, pump disassembly, pump maintenance, and pump troubleshooting, as well as how to select the proper gear pump for an application and how to calculate theoretical and actual flow rates.
Pump Maintenance & Troubleshooting Skills
The Magnetic Pump Learning System (95-PM1-G) covers the magnetic pump, which uses a magnetic coupling to prevent direct contact between the motor drive shaft and the pump impeller. This feature eliminates any possibility of leakage or seepage and makes the magnetic pump an ideal selection for pumping hazardous chemicals that could harm the environment or for expensive liquids where it is important to reduce loss. This industrial pumps training system explains the function, operation, installation, disassembly, inspection, and maintenance of a magnetic pump.
Additional topics include: how to properly align the magnetic coupling; how to troubleshoot problems; how to select the correct magnetic pump for an application; how to determine a pump’s flow/pressure characteristics; and how each component of the pump factors into the overall operation.
Pages
-
Item Number:950-TNC1 -
Amatrol’s virtual trainers replicate physical systems in such detail that students can build skills even when they don’t have access to actual equipment. -
Item Number:950-TGC1Amatrol’s Wind Turbine Generator Control Troubleshooting allows students to develop operation and troubleshooting skills... -
Offering unmatched depth and breadth of training, Amatrol’s Oil and Gas Program builds industry-relevant competencies using world-class simulators featuring industry-standard components and highly interactive curriculum. The Oil and Gas Program covers vital areas such as electrical, electronics, instrumentation and process control, and mechanical training. -
Amatrol’s Workplace Safety training courses explain the basic principles necessary to keep work environments as accident-free as possible. Learners will study the common causes of workplace accidents and the role of OSHA and other agencies regulating safety before moving to personal safety actions and awareness, such as Personal Protective Equipment, Hazardous Communication, Lockout / Tagout, and Accident Response. -
Tech-Labs offers equipment and curriculum from Amatrol’s Advanced Manufacturing program. Amatrol’s industry-leading equipment and curriculum are developed in partnership with industry to deliver job-ready, industry-relevant skills. Working closely with companies like Caterpillar, Tropicana, and many others Amatrol has designed equipment for workplace success. -
CNC Machine Operators require skills in operating a CNC machine but are not machinists. Through industry task analysis as well as strong involvement with our development partner, a large global manufacturer, Amatrol’s CNC Machine Operator Program brings a highly focused, streamlined set of skills to CNC Machine Operator training. -
Amatrol has developed the most comprehensive, in-depth selection of online electrical training solutions available today, beginning with the basics of AC/DC electrical and moving on to more advanced topics like electrical machines, relay control, and fabrication; electrical motor control; and electrical wiring and power distribution. -
Amatrol’s electronics learning systems combine hands-on skills and multimedia curriculum to form a training experience with unmatched breadth and depth. This product focusses on electronic drives and programmable logic controllers to give current and future workforce members the knowledge that they’ll need to excel in the their career paths. -
Amatrol’s mechanical training systems are the best in the industry. The learning programs were developed in partnership with industry and education to insure that the skills are on target to support modern industry needs.
